In the video below, the anatomical structures are indicated on the beating heart
Observe: Liver, apex of the heart, basis of the heart, right atrium, right ventricle, left atrium, left ventricle, inter-ventricular septum, inter-atrial septum.
In the video below, the anatomical structures are indicated on the beating heart
Observe: Liver, apex of the heart, basis of the heart, right atrium, right ventricle, left atrium, left ventricle, inter-ventricular septum, inter-atrial septum.
The structures identified in the FATE position 2 – the apical view:
– Apex of the heart
– RA: Right atrium
– RV: Right ventricle
– LA: Left atrium
– LV: Left ventricle
– Lateral wall
– Descending thoracic aorta
– Anterior mitral leaflet
– Posterior mitral leaflet
– IVS: Inter-ventricular septum
– IAS: Inter-atrial septum

The probe is placed on the skin, the yellow fan-like sector (the scanning plane) diverges from the probe and intersects the heart
The orientation marker (OM – grey arrow) is pointing towards the left side of the patient (the right side of the screen)
To understand how the sector is presented on the screen, imagine that the upper border of the screen is the skin, and the sector diverges from the probe placed on the skin.
The blue radius on the screen corresponds to the blue margin of the yellow fan
The red radius on the screen corresponds to the red margin of the yellow fan
The left ventricle is displayed on the right side of the screen, when the OM is correctly pointing towards the patient
The target view is a 4 chamber image corresponding to the scanning plane indicated on the torso of the picture
All four chambers are viewed in long axis
As the transducer is placed at the apex, both the right (RV) and the left (LV) ventricles appear in the near field and the right (RA) and left (LA) atria appear in the far field
When a 4 chamber view is present on the screen, there is by definition zero degrees of rotation

The apical view is obtained by placing the transducer where the cardiac apex is most easily palpated
The orientation marker on the transducer should be directed towards the patient’s left side
Notice the location of the heart in the thoracic cavity and the orientation of the ultrasound sector beam

Page 1 on the FATE card is used for this part of the FATE examination
Position 2 is indicated on the FATE torso in the bottom right corner of page 1 on the card
The top right image is the target image to be obtained in position 2
Study the FATE card and memorise the position and what target image to look for before beginning the examination
You can download the FATE card from: usabcd.org/FATE-card

The apical view is a 4 chamber view (A4CH) imaging all 4 chambers of the heart
The position is obtained in position 2 indicated on page 1 of the FATE card
The apical 4 chamber view is suitable for a quick qualitative evaluation of:
– Pathology (pericardial effusion, pulmonary embolus)
– Wall thickness
– Chamber dimensions
– Bi-ventricular function
This lesson will go through position 2 in detail, focusing on how to obtain and interpret the right 2D ultrasound image

The relationship between the IVC and right atrium pressure can be characterised as follows:
IVC diameter <2.1 cm and >50% collapse (inspiratory sniff) suggests normal RA pressure (0-5 mmHg)
IVC diameter >2.1 cm and <50% collapse (inspiratory sniff) suggests high RA pressure (10-20 mmHg) IVC diameter and collapse that do not fit into these two scenarios indicate intermediate RA pressure increase (5-10 mmHg)

Before you start scanning, ask yourself:
1. Which position – 1, 2, 3 or 4?
2. How should I hold the probe?
3. Where should the orientation marker (OM) be pointing to?
4. What should appear on the screen?
Holding the probe in your right hand:
1. Apply gel without touching the footprint of the probe with the gel dispenser
2. Place the transducer on the chest wall where you expect to get the desired image
3. Circle with your hand until you recognise any anatomical structures on the screen
4. Then optimise the image in only one plane at a time by rotating / tilting / sliding
Anatomy
You have now learned:
– The anatomy of the FATE position 1 – the subcostal 4 chamber and IVC view
– How to obtain the correct images with respect to transducer orientation and the relationship of sector beam of the probe and the image on the screen
– To appreciate the biological variations
– IVC scanning and the limitations, especially that the IVC is an unpredictable guide in fluid management and should not be used as a single parameter for guidance of fluid therapy
When you feel confident move on to the next lesson on the FATE position 2, the apical 4 chamber view (A4CH)
You can download the FATE card here: usabcd.org/FATE-card
